Palladium P-39F Specs - The Klipsch Community
in
Advanced Search
KLIPSCH - The Ultimate Sound Experience

Palladium P-39F Specs

Last post 05-15-2008 12:51 PM by Amy Unger. 69 replies.
Page 1 of 5 (70 items) 1 2 3 4 5 Next >
Sort Posts: Previous Next

  • 01-15-2008 4:03 PM

    Palladium P-39F Specs

    Reply Contact

     Specifications: Palladium P-39F

    Frequency Response         39Hz-24kHz +/-3dB
    Low Frequency Extension         28Hz
    High Frequency Extension     30kHz
    Sensitivity             99dB @ 2.83V / 1m
    Nominal Impedance             4 ohms (2.9 ohms min)
    Power Handling                 400W continuous / 1600W peak
    Recommended Amplifier Power    50 - 1000W
    Maximum Output Level        126dB (2 speakers in-room)
    High Frequency Drivers        0.75" (1.9cm) Titanium diaphragm compression driver mated to 90° x 60° Tractrix® Horn
    HF X-over Freq            3200Hz
    Mid Freqeuncy Drivers        4.5" (11.4cm) Aluminum diaphragm compression driver mated to 90° x 60° Tractrix® Horn
    MF X-over Freq            500Hz
    Low Frequency Drivers        Three 9" (22.9cm) high-output, aluminum / Rohacell® / Kevlar® hybrid cone woofers
    Finishes            Zebrawood in Natural, Merlot or Espresso stain
    Enclosure Type            Bass-reflex via triple side-firing ports
    Enclosure Material        Constrained layer MDF (Medium Density Fiberboard)
    Weight                165lbs (74.9kg)
    Height                56" (142.2cm)
    Width                12" (30.5cm) (14.5" / 36.8cm at the base)
    Depth                24.75" (62.9cm)
    Built From:            2008 -

    Amy Unger
    Forum Administrator
    amy.unger@klipsch.com
    I take a random photo at Klipsch every day
    Filed under:

  • 01-15-2008 4:09 PM In reply to

    • seti
    • Top 50 Contributor
    • Joined on 07-06-2004
    • Arcansaw 1st home of Klipsch
    • Posts 4,524

    Re: Palladium P-39F Specs

    Reply Contact
    Nice thanks! I saw that pic posted in the blog.... That was a pretty curve.
    "First off, I don't even consider myself a member of the general public. I know that my own requirements in a loudspeaker are those I've discussed. judging from what contact I have with the general public, though, I conclude that 99 percent of the general public doesn't even know what accuracy of reproduction is. My company is for the one percent composed of perfectionists who buy these expensive speakers." PWK

    DON'T BE EVIL

  • 01-15-2008 4:11 PM In reply to

    Re: Palladium P-39F Specs

    AudioCover2.jpg
    Reply Contact

    And a nice cover shot on Audio Magazine out of Germany (literal translation of headline:  The Horn-Box Without Errors)

     


    Amy Unger
    Forum Administrator
    amy.unger@klipsch.com
    I take a random photo at Klipsch every day

  • 01-15-2008 4:12 PM In reply to

    Re: Palladium P-39F Specs

    Reply Contact

    seti:
    Nice thanks! I saw that pic posted in the blog.... That was a pretty curve.
     

    You're welcome, seti, and thanks for reading! 

    Amy Unger
    Forum Administrator
    amy.unger@klipsch.com
    I take a random photo at Klipsch every day

  • 01-15-2008 4:12 PM In reply to

    • billybob
    • Top 500 Contributor
    • Joined on 10-23-2007
    • Big Bend Florida
    • Posts 857

    Re: Palladium P-39F Specs

    Reply Contact

    Amy Unger:

     Specifications: Palladium P-39F

    Frequency Response         39Hz-24kHz +/-3dB
    Low Frequency Extension         28Hz
    High Frequency Extension     30kHz
    Sensitivity             99dB @ 2.83V / 1m
    Nominal Impedance             4 ohms (2.9 ohms min)
    Power Handling                 400W continuous / 1600W peak
    Recommended Amplifier Power    50 - 1000W
    Maximum Output Level        126dB (2 speakers in-room)
    High Frequency Drivers        0.75" (1.9cm) Titanium diaphragm compression driver mated to 90° x 60° Tractrix® Horn
    HF X-over Freq            3200Hz
    Mid Freqeuncy Drivers        4.5" (11.4cm) Aluminum diaphragm compression driver mated to 90° x 60° Tractrix® Horn
    MF X-over Freq            500Hz
    Low Frequency Drivers        Three 9" (22.9cm) high-output, aluminum / Rohacell® / Kevlar® hybrid cone woofers
    Finishes            Zebrawood in Natural, Merlot or Espresso stain
    Enclosure Type            Bass-reflex via triple side-firing ports
    Enclosure Material        Constrained layer MDF (Medium Density Fiberboard)
    Weight                165lbs (74.9kg)
    Height                56" (142.2cm)
    Width                12" (30.5cm) (14.5" / 36.8cm at the base)
    Depth                24.75" (62.9cm)
    Built From:            2008 -

    Wonder how this is possible:Frequency Response         39Hz-24kHz +/-3dB
    Low Frequency Extension         28Hz     High Frequency Extension       30khz       Dynamic threshold extension?

    Anyway, great looking specs!



    What song the Syrens sang, or what name Achilles assumed when he hid himself among women, although puzzling questions, are not beyond all conjecture. Sir Thomas Browne

  • 01-15-2008 4:41 PM In reply to

    • Mr. RF62
    • Not Ranked
    • Joined on 08-21-2007
    • Kingston, Ontario
    • Posts 188

    Re: Palladium P-39F Specs

    Reply Contact

    Ah, I was just going to ask the same question, extension...?

    Without great frequecy response & sensitivity, what do you have left???

  • 01-15-2008 4:53 PM In reply to

    Re: Palladium P-39F Specs

    Reply Contact

    The frequency response measurement is recorded at +/- 3dB...the extension frequency at around -10db. 

    I could have an engineer-type explain it much better, but that's what I've got for you for the time being.  Smile 

    Amy Unger
    Forum Administrator
    amy.unger@klipsch.com
    I take a random photo at Klipsch every day

  • 01-15-2008 4:59 PM In reply to

    • seti
    • Top 50 Contributor
    • Joined on 07-06-2004
    • Arcansaw 1st home of Klipsch
    • Posts 4,524

    Re: Palladium P-39F Specs

    Reply Contact

     For those that didn't make it to Amy's blog http://forums.klipsch.com/blogs/amy/default.asp here is the teaser from yesterday

    "First off, I don't even consider myself a member of the general public. I know that my own requirements in a loudspeaker are those I've discussed. judging from what contact I have with the general public, though, I conclude that 99 percent of the general public doesn't even know what accuracy of reproduction is. My company is for the one percent composed of perfectionists who buy these expensive speakers." PWK

    DON'T BE EVIL

  • 01-15-2008 5:00 PM In reply to

    • billybob
    • Top 500 Contributor
    • Joined on 10-23-2007
    • Big Bend Florida
    • Posts 857

    Re: Palladium P-39F Specs

    Reply Contact

    Amy Unger:

    The frequency response measurement is recorded at +/- 3dB...the extension frequency at around -10db. 

    I could have an engineer-type explain it much better, but that's what I've got for you for the time being.  Smile 

    Good enough for me! Am sure more engineer-types will appreciate your response!

    Thanks!



    What song the Syrens sang, or what name Achilles assumed when he hid himself among women, although puzzling questions, are not beyond all conjecture. Sir Thomas Browne

  • 01-15-2008 5:12 PM In reply to

    • Mr. RF62
    • Not Ranked
    • Joined on 08-21-2007
    • Kingston, Ontario
    • Posts 188

    Re: Palladium P-39F Specs

    Reply Contact

    Yes, Thanks Amy, I never looked at it that way, using the term "Frequency Extension" for levels of -10db to -16db.. I'll never look at another speaker the same way thats measuered at +/-3db.

    S

    Without great frequecy response & sensitivity, what do you have left???

  • 01-15-2008 6:09 PM In reply to

    • Islander
    • Top 150 Contributor
    • Joined on 09-19-2006
    • Vancouver Island, BC, Canada
    • Posts 1,903

    Re: Palladium P-39F Specs

    Reply Contact

    How thick is the enclosure?  One inch?  Does it vary in thickness?

    Pat on the Island
    510 JubScalas + Paradigm PW-2100, powered by Yamaha MX-D1 x 2,
    EQ'd by Electro-Voice Dx38, controlled by Yamaha RX-V750,
    fed by Technics SL-1400MK2 & Yamaha DVD-S550

    Surround: above plus 2 '90-'92 Heresy IIs + 1 '89 Heresy II

  • 01-15-2008 6:18 PM In reply to

    • billybob
    • Top 500 Contributor
    • Joined on 10-23-2007
    • Big Bend Florida
    • Posts 857

    Re: Palladium P-39F Specs

    Reply Contact

    Islander:

    How thick is the enclosure?  One inch?  Does it vary in thickness?

    Featuring a “boat-tail” enclosure, the P-39F’s cabinet walls are up to 30mm thick with multiple laminations of medium density fiberboard that have been molded through a proprietary process. Extensive internal bracing gives the speaker a more rigid and structurally sound enclosure 

      http://www.klipsch.com/news-center/press-releases/details/klipsch-palladium-floorstander-a-symbol-of-supreme-luxury.aspx

     

    Link from a *Kynergy(member) topic/post:



    What song the Syrens sang, or what name Achilles assumed when he hid himself among women, although puzzling questions, are not beyond all conjecture. Sir Thomas Browne

  • 01-15-2008 8:06 PM In reply to

    • boom3
    • Top 500 Contributor
    • Joined on 10-11-2004
    • Gulf Coast
    • Posts 939

    Re: Palladium P-39F Specs

    Reply Contact

     How 'bout distortion (including FM) at various output levels?

    I prefer science-based faith to faith-based science.

  • 01-15-2008 8:44 PM In reply to

    • Islander
    • Top 150 Contributor
    • Joined on 09-19-2006
    • Vancouver Island, BC, Canada
    • Posts 1,903

    Re: Palladium P-39F Specs

    Reply Contact

    billybob:

    Islander:

    How thick is the enclosure?  One inch?  Does it vary in thickness?

    Featuring a “boat-tail” enclosure, the P-39F’s cabinet walls are up to 30mm thick with multiple laminations of medium density fiberboard that have been molded through a proprietary process. Extensive internal bracing gives the speaker a more rigid and structurally sound enclosure 

      http://www.klipsch.com/news-center/press-releases/details/klipsch-palladium-floorstander-a-symbol-of-supreme-luxury.aspx

     

    Link from a *Kynergy(member) topic/post:



    Thanks, that clears it up.
    Pat on the Island
    510 JubScalas + Paradigm PW-2100, powered by Yamaha MX-D1 x 2,
    EQ'd by Electro-Voice Dx38, controlled by Yamaha RX-V750,
    fed by Technics SL-1400MK2 & Yamaha DVD-S550

    Surround: above plus 2 '90-'92 Heresy IIs + 1 '89 Heresy II

  • 01-16-2008 2:40 AM In reply to

    Re: Palladium P-39F Specs

    Reply Contact

    Frequency Response 39Hz-24kHz +/-3dB

    hmmm all the reference floorstanders from the rf-82, rf-63 dig deeper? 

    BECAUSE GREAT SOUND
    fills the room, shakes the house,

    BREAKS THE HEART,
    stirs the soul,

    AND
    always will.

    Officially been given the title "Jubilee Lust" er.... by Berry Boy.

    RF-83 Cherry
    RB-75 Cherry
    RSW12
    TC Sounds (Audio Pulse) LMS 5400 18"
    Denon 3805
    Crown XTI 1000
    Denon 2910
Page 1 of 5 (70 items) 1 2 3 4 5 Next >
The Ultimate Sound Experience
The Klipsch Community » Home Audio » General Questions » Palladium » Palladium P-39F Specs
©2008 Klipsch Audio Technologies. All rights reserved.