Home Theater

Re: Almost time to calibrate new system: I'm a little gun shy.

thaddeussmith — Wed, 01 Jul 2009 12:21:05 GMT

this thread at avsforum will be your best friend in setting up that marantz: http://www.avsforum.com/avs-vb/showthread.php?p=14456895#post14456895 read it, absorb it, read it again...

Re: Almost time to calibrate new system: I'm a little gun shy.

substance-p — Wed, 01 Jul 2009 02:06:11 GMT

The reciever is a Marantz my Brother gave me when he upgraded. It's only a couple of years old so it likely has auto setup. I need to download the manual though as it is a bit more complicated than my Yamahas

Re: Almost time to calibrate new system: I'm a little gun shy.

kelA — Wed, 01 Jul 2009 01:52:32 GMT

If it is a good aquintance, invite him over for some Milk and pizza and the two of you learn your system together if you are really intimidated. As the others have said, it is really pretty simple. Dont let it get the best of ya. Nowadays almost every receiver on the market has a auto setup, where you let the receiver do the initial adjustments and you just tweak afterwards.

Re: Almost time to calibrate new system: I'm a little gun shy.

CECAA850 — Tue, 30 Jun 2009 21:47:18 GMT

If your receiver comes with a mic and calibration software then all you do is follow the manual. If not, buy a disc like AVIA and an SPL meter from Radio Shack. The disc will walk you through the calibration process.

Re: Almost time to calibrate new system: I'm a little gun shy.

substance-p — Tue, 30 Jun 2009 20:39:57 GMT

To be honest, theyhave been logitech harmony remotes so the programming was pretty simplistic

Re: Almost time to calibrate new system: I'm a little gun shy.

dtel — Tue, 30 Jun 2009 19:36:13 GMT

If you can program a remote you can set this up.

Re: Almost time to calibrate new system: I'm a little gun shy.

substance-p — Tue, 30 Jun 2009 18:59:17 GMT

This will be a good learning opportunity. I have always set up my own systems, done the wiring, and programmed the universal remotes; however, they have always been basic and I haven't had to/or just didn't take the time to calibrate the system to get it sounding as good as it should. This time I am determined to do it right.

Re: Almost time to calibrate new system: I'm a little gun shy.

dtel — Tue, 30 Jun 2009 18:31:17 GMT

I would NOT pay someone to "dial it in" you CAN do it It's not that hard.

All you have to do is get some help here everyone will be glad to help, it's really not that big of a deal just do one step at a time.

If someone else does it for you you will have no idea whats going on when you want to adjust something or make a change, take the time to learn how it works, it's really simple if you just follow why things get set as they do, you will see how it all ties in together.

Almost time to calibrate new system: I'm a little gun shy.

substance-p — Tue, 30 Jun 2009 14:25:13 GMT

I have been working on getting my home theater setup in our new house and it should be all ready to go next week. I will be running a 7.2 system: RC-64, 2 RF-35s, 2 RS-35s, and the rears are TBD (with my KG 3.5s filling in until I can get a pair of RB 25s/35s or RF 25s/35s). Subs are an RSW-10d and the Big Boy (which my Wife compares to a small child or a mini-fridge) Jamo D7. I will be using a Marantz receiver (I am spacing on the model #).

This is my first time to have a more complex system and with just an initial once over witht he Marantz, I am a little worried about getting this thing dialed in. I have an acquaintance who owns a home theater business and will give me a decent deal (price to be determine) on calibrating the system, but I hate to spend too much money (reserves getting tapped out).

Any tips for a newbie to help me get this system performing to its potential?