I recently got hissing to all the sats and sub.  I took the amp out and found the problem to be the BASH HC1011 chip.  If I apply pressure and push the BASH chip down towards the PCB with a slight angle the hissing goes away but there is still a slight hiss coming from the chip itself. 

Anyone know if I can buy this chip anywhere?

 Or any solutions to this problem?  I tried electrical tape to hold down the chip but the tape stretches and within a day the hissing comes back.. 

Infinity used the same chip on some of their powered home speakers (IL60 may have been the model of one of them).  I bought a couple of these chips from an Infinity repair shop early last year. Infinity used the same part number. Cost with shipping can get over $20 each.

it's $24 without shipping from Infinity

phone: 516-255-4525

part: HC1011 

i took some pictures of the BASH chip just in case any are curious. i really want to figure this stupid thing out. 

 

http://ripken204.com/images/BASH_1.jpg

http://ripken204.com/images/BASH_2.jpg 

 

 

 

what is the value of R19 in the above picture ?? mine is a little bit burnt, and I pulled one leg and measured 26.10Kohm, is that close ??

Oh BTW my bash1011 board does the same as all the rest, causes a whining-screaching sound unless you bend it a little by pressing

one corner or the other, but it doesnt last for long.

 

-CHUCK

Isn't it interesting that I am having the same issue that can be fixed by pressure and twisting. I have fixed similar issues to this one by re-soldering the joints of parts on a problem board. I haven't tried with these speakers yet and I don't know if I should. I might just go ahead and buy the chip from Infinity if I can. Some people say it is an issue of heat but I beg to differ. The whole design premiss behind it is that the air flow created by the subs would be sufficient to cool the powering system. The louder and more power drawn, the more air flow required which is made by the subs. I bought my set of ProMedia Ultra 5.1s in the spring of 2007 and just yesterday my speakers stopped working with a slight squeal but not the sub. I called Klipsch today and didn't get any help in any way. They informed me that I could pay $125 for it to be fixed by them, but that of course means I have to send them the sub or at least the amp part. So tac on the shipping charges to that and you have the price of the set them selfs. -Jake Sherlock

I should make it clear that my opinion is that BASH has miss engineered their chips. They should be able to handle the hi temps reached within the casing of a sub. I also think Klipsch has miss engineered their speaker system. It should have been clear to Klipsch that hi temps would be reached and a chip with a low temp tolerance should have not been put inside their sub box. My dad bought the same set of speakers from the same store at the same time. He is a light listener (Low volume - Not often) compared to me who is right into loud movies and techno with heart disrupting bass. I also use my speakers in a home theatre arrangement so high volumes are a must to fill the size room I have, where as my father has a small computer room. His speakers keep ticking on nice and clear. Mine on the other hand, well broken in.

So here are my results. I ordered from JAM Industries Ltd. 21000 TransCanada Hwy, Baie D'Urfe, Quebec, Canada H9X 4B7 two HC1011 chips. They came and I installed one. It works great. No more hissing and sound is back to normal. 2x 23.20 $46.40 Ship 9.95 Admin. 10.00 Subtotal 66.35 Tax (12%) 7.96 Final Total $74.31 Feel free to contact the lady I spoke to here. Susan Hatt Consumer Parts Sales Coordinator (Ontario, the Maritimes & Western Canada) 1-877-526-5463 ext. 2262 Fax: 1-800-563-2591 mail to: susan.hatt@jamindustries.com Visit our website www.jamindustries.com -Jake

if jam industries is you websiet why you ordered from you own website
----------------
electronics suppliers