[quote user="Islander"]Check out your local electrical/electronics jobber. They may have a selection of colours in various sizes.[/quote] Would that be Rat Shack? Ugggh, that's all we've got around here for electronics. Although, there is an electrical supplier wholesaler nearby, I can check there. Greg

[quote user="Don Richard"] Whether the wires are tinned or not will make no difference in performance for the short lengths used between the xover and drivers in a loudspeaker enclosure. The tinning will increase corrosion resistance and corrosion will affect wire performance, The tinned wires will be easier to solder and will make a better soldered joint. Any good 60/40 (Kester, Ersin) rosin core solder will be fine, no need for silver solder here. Twisting the wires will increase capacitance

Last pic

another pic

I have a pair of ALK Universal networks that I built from kits that Al provided to me with crossover points at 400Hz and 4500Hz, versus the normal 400Hz - 6000Hz. They have been used less than an hour. Hovland caps to the mids, Jantzen on the tweeters. Good parts and a good build quality. Best used with the K400 horn and Crites Tweeter upgrade. $475 - which includes shipping to the CONUS. Greg

[quote user="William F. Gil McDermott"] Colors http://www.justradios.com/heatshrinktubing.html Greg I really appreciate your sense of aesthetics. Wm McD [/quote] Thank you and thank you. Darn it, they only have the good colors in 1/16". I would need larger than that to get over the band on those spade ends. Probably 1/4", maybe 3/16". Greg

[quote user="Oblio"] Greg, very nice restoration !! [/quote] Thank you. The FLKhorns are the best I've done so far. Greg

[quote user="GO66"] [quote user="greg928gts"] www.dcchomes.com/FLKhorns.html Greg [/quote] I'm new to this forum, but not new new to "build threads". I understand that your link is for marketing, but the attention to detail is impeccable. In the short time I have been here I have seen many of your posts and I can appreciate the time it takes to post the quality information that you do. You are a true "Master" [/quote] Thank you for the kind words. "Master"

I would like to get some feedback on what you think about these cables for internal wiring for Khorns between the components and the crossover. I know I don't NEED anything more than 16ga plain wire, but I like the idea of having nice looking wires, even though I know nobody sees the wiring. I still like everything to look really nice. These are both tinned, twisted pair. Any thoughts on tinned wire versus regular copper strand? http://www.knukonceptz.com/productDetail.cfm?prodID=KAR16SS-100

On hold for jhoak for a week or so. Greg