Xavier is cool; great Pharmacy School. Nice to know that our country thought so much of us, that Qatar is spending $100M to rebuild the Pharm School. But I digress. Give me a buzz, maybe meet over a beer/wine/beignets/etc. You can send me an email directly through the system without having to post your private info on the forum too.

My those are pretty :) However, I have built some ALK Unis this past May/June and have the K77s, not the C125s, nor Beymas, etc. Given my hearing (tests ok to 8 KHz, but audiologist could not test above that) and the great directionality of tweeters, I am not yet convinced to replace my 77s. (Anyone can test this high frequency directionality by using a test tone generator on a PC: run a plug from computer headphone jack to an Ipod input or 1/8" plug to stereo RCA splitter to any of your preamps

- sorry, posted twice by accident -

Welcome Editor B :) There were intended to be a center channel speaker for K Horns. Klipsch user in NOLA as well here. I think your stuff is from 1971. Upload some pics - esp. of the innerds. There are about 8 screws holding the rear wooden board in place. Unlikely to be sealed any further. Also, they likely need recaps badly. I work at Tulane. Give me a holler....... NOLA

As an owner of 5 Heresy spkrs with 4 more on the way: your 83 HIs are likely using H II components. Open them up. Check the xovers too. Unlikely to be type E. I have found the quality of the H Is to be far greater than the H IIs. The cabinetry is braced and constructed far better on the H Is. The drivers on the true mid 70s H Is are just like the KHorns and LaScalas (K77 and K55). The H IIs use different drivers - that look cheap by comparison. After recapping, my Is and IIs came closer together

Came across this post by accident :) I did not find the actual info on the innerds of this sub. However, my Behringer 1800s (10 yr old version) have a crossover network inside the subs. I think I have these swiched off. I believe the xover is intended to send non-sub signal to the regular spkrs that would mount on the pole on top of the subs in a typical commercial / pro set up, like at a nightclub or travelling DJ. That stated, if these are not "ported", if you send only subwoofer signal

Hello Michael - while watching a beautiful sunset in Barcelona, while at a Congress. Michael, thanks for all of your assistance to all of us. You have indeed earned some extra Karma points. A life lived helping others is indeed a life well lived - even if it's just speakers.....LOL. You were a great host in June. If it is the meaning of life you seek, well, few find it. As one person said here yesterday: the survivors are neither the strongest nor the smartest, they are, simply put, the most

Currently, I am modding the Khorns, but could just as easily mod the LsScalas, as they are all in the main room. I do not have any active xovers now. I have stock Klipsch AAs, some have been recapped with Crites Sonicaps, some have not. I also built the ALK Unis early summer. I have type E xovers in the Heresy Is and the round cup H II xovers as well. Academies x 2,.....whew...... I could also buy some new inductors, caps, etc. Of course, the various xovers are mated to the orig spkrs (except the

Currently enjoying active crossover - Modified Behringer DCX 2496 ..........what is the mod to the 2496? thx

Wow, thanks for the reply. Sorry for my delay in getting back to you. My lappy HD did not appreciate a fall. All better now, a week later. Hi! I just got done with a LSI project to make my wife happy. I posted a pic on the Modification forum. If you like the concept and can't fi (nd a Belle, but come across an ugly LS, maybe I can teach it up for you. My local hardwood wholesaler has most everything, so matching your Khorns (wood-wise) is probably doable. Logisitics would be a problem, but my