Browse by Tags

Promedia 2.1 Amp

I bought a 2 year old system off of someone for $50 and everything was working. A couple days later, I hooked it up and the left speaker didnt work, I suspected wiring so I switched the wires and checked and now neither speaker works. Looking at a couple of options I opened the sub and found a blown...

Posted to Computer Speakers (Forum) by Gary_singh_111@hotmail.com on 07-07-2009
Filed under: fried, broken, dead, fuse, computers, Klipsch, buzzing, heat, Promedia, burnt, THX, rumbling, subwoofer, Rattling sound, overheating, Promedia 2.1 subwoofer, pop crackle on off crackling hiss, promedia 2.1, distortion, amp, sub, sound, busted, speaker, pictures, pic, pics, not working, speakers, noise, picture, damaged, amplifier, satellite, hot, Computer Speakers, 2.1, Problems, hiss, hum, Promedia 2.1 satellite distortion, Promedia 2.1 left channel doesn't work right speaker, sound issues, left speaker, Picromedia 2.1, Troubleshooting, Right Channel, lost channel, port, 2.1 control pod troubleshooting left, Promedia Promedia 2.1 Wont work amp, promedia 2.1 left channel dead, left channel
Replace Speaker terminal on ProMedia GMX 2.1

I upgraded the speaker wire on my ProMedias to 14 gauge (and soldering the rca connector onto one end was NOT fun). But now I find the 14 gauge wire is too big for the tiny, spring-loaded speaker terminals on the back of the GMX 2.1 sub-woofer...and the connection is just cheesy. Has anyone replaced...

Posted to Computer Speakers (Forum) by danmarycap on 05-17-2009
Filed under: Promedia, GMX A-2.1, Promedia 2.1 subwoofer, promedia 2.1, sub, speakers, upgrade, cables, 2.1, klipsch promedia gmx a 2.1, GMX 2.1
Needing Internal Transformer for ProMedia 2.1

My Promedia lasted a many good Years except till now. No noise when turned on, Checked fuses internal and within holder, all good. No voltages going to PCB. Transformer has internal thermal fuse, not accessable due to coating. Need to purchase replacement Transformer for ProMedia 2.1. HELP... Model on...

Posted to Computer Speakers (Forum) by dlloyd1970 on 02-17-2009
Filed under: Promedia 2.1 subwoofer
Promedia 2.1 subwoofer no longer functioning

The subwoofer in my 2.1s just stopped working today. The satellites are working fine. I checked the fuse and it is OK as well. I took a peek inside the sub and didnt see anything fried or damaged. Is there anything obvious I can check or does anyone repair these any more? Have had these speakers for...

Posted to Computer Speakers (Forum) by iretch on 02-14-2009
Filed under: Promedia 2.1 subwoofer
Promedia 2.1 Resistor Values / Schematic

My promedia 2.1 stopped functioning and I found a blown resistor on the SP2 circuit card. The resistor is numbered as R417 but is toasted so no values are available. Does anyone have a schematic or happen to know what the value is o this resistor. Really techy question, but hope someone's got the...

Posted to Computer Speakers (Forum) by DOK48 on 12-07-2008
Filed under: Klipsch, Promedia 2.1 subwoofer
Promedia 2.1 Subwoofer low volume output

I just bought a used set of Promedia 2.1 speakers and they seem to work fine with one exception. I have to have the subwoofer set to the max volume to get a fair amount of bass oout of the sub. I know there is a mark at the 10 oclock position where Klipsch says it should be set but I get very little...

Posted to Computer Speakers (Forum) by FerrariF1 on 10-23-2008
Filed under: Promedia 2.1 subwoofer
Can speaker in ProMedia 2.1 subwoofer cabinet be replaced?

The black rubber parts of the speaker have deteriorated, and the speaker buzzes even at low volumes. I opened up the subwoofer, but it seems the speaker is actually glued in place. Has anyone tried to remove and then replace the subwoofer speaker? Any other recommendations? Thanks, Pete

Posted to Computer Speakers (Forum) by konaboy on 10-29-2009
Filed under: buzzing, subwoofer, Promedia 2.1 subwoofer, speakers, repair, crackling, Klipsch Promedia 2.1
ProMedia 2.1 fried resistor (I think)

We have had this speaker system in my class for like 4 years now and we finally hooked them up. The volume control knobs work backwards and the satellite speakers play but with low volume (though the knobs are turned completely to "Min"). The subwoofer does not work at all and only a small...

Posted to Computer Speakers (Forum) by maxcavett on 11-06-2009
Filed under: fried, burnt, Promedia 2.1 subwoofer, DIY, Picromedia 2.1, Low Volume, knob failure, repair
Problem with Promedia 2.1 Subwoofer

Hey guys, I am having a problem with my promedia 2.1 sub. Whenever it is turned on there is this low distorted noise that won't go away. It even makes this noise when nothing else is plugged into it. Any idea what the problem is? Thank you!!!!

Posted to Computer Speakers (Forum) by presidentwilliamhowardtaft on 02-11-2009
Filed under: Promedia 2.1 subwoofer
Promedia 2.1 Subwoofer Driver replacement

I'm looking for a replacement "Subwoofer Driver" used in the Promedia 2.1, as the Surrounds (rubber/foam?) on the orignal Subwoofer driver have completely disintegrated.

Posted to Computer Speakers (Forum) by Sound_Species on 08-24-2009
Filed under: subwoofer, Promedia 2.1 subwoofer, promedia 2.1, sub, speaker, damaged, Computer Speakers, 2.1

Page 1 of 1 (10 items)