Browse by Tags - The Klipsch Community
in
Advanced Search
KLIPSCH - The Ultimate Sound Experience
All Tags » promedia (RSS)

Browse by Tags

  • Promedia 2.1 Amp

    I bought a 2 year old system off of someone for $50 and everything was working. A couple days later, I hooked it up and the left speaker didnt work, I suspected wiring so I switched the wires and checked and now neither speaker works. Looking at a couple of options I opened the sub and found a blown...
    Posted to Computer Speakers (Forum) by Gary_singh_111@hotmail.com on 07-07-2009
    Filed under: fried, broken, dead, fuse, computers, Klipsch, buzzing, heat, Promedia, burnt, THX, rumbling, subwoofer, Rattling sound, overheating, Promedia 2.1 subwoofer, pop crackle on off crackling hiss, promedia 2.1, distortion, amp, sub, sound, busted, speaker, pictures, pic, pics, not working, speakers, noise, picture, damaged, amplifier, satellite, hot, Computer Speakers, 2.1, Problems, hiss, hum, Promedia 2.1 satellite distortion, Promedia 2.1 left channel doesn't work right speaker, sound issues, left speaker, Picromedia 2.1, Troubleshooting, Right Channel, lost channel, port, 2.1 control pod troubleshooting left, Promedia Promedia 2.1 Wont work amp, promedia 2.1 left channel dead, left channel

  • Replace Speaker terminal on ProMedia GMX 2.1

    I upgraded the speaker wire on my ProMedias to 14 gauge (and soldering the rca connector onto one end was NOT fun). But now I find the 14 gauge wire is too big for the tiny, spring-loaded speaker terminals on the back of the GMX 2.1 sub-woofer...and the connection is just cheesy. Has anyone replaced...
    Posted to Computer Speakers (Forum) by danmarycap on 05-17-2009
    Filed under: Promedia, GMX A-2.1, Promedia 2.1 subwoofer, promedia 2.1, sub, speakers, upgrade, cables, 2.1, klipsch promedia gmx a 2.1, GMX 2.1

  • Re: promedia ultra 2.0: sometimes no sound

    I posted on this a few months ago... Thanks to the good folks on this board, I found the DeOxit solution. After removing the 10 screws (at least 2 too many) the rest was simple and the full volume control, crackle-free sound, and quality audio was restored -- for a while. After about a month left on...
    Posted to Computer Speakers (Forum) by Joe H on 04-01-2009
    Filed under: broken, Klipsch, Promedia, pop crackle on off crackling hiss, speaker, not working, speakers, noise, damaged, Problems, sound issues, Troubleshooting, bass knob, volume knob, DeOxit, knob failure

  • Classic ground loop hum on Promedia 5.1 with or without source.

    Hi Folks! I get a quiet 60hz hum on subwoofer, front, center, and probably rear. I get it with and without the inputs plugged in. Yes, I've tried other outlets, same hum. I tried unplugging speakers. It's pretty much always there, same loudness regardless of the volume setting. Is it likely something...
    Posted to Computer Speakers (Forum) by Charlweed on 01-13-2009
    Filed under: Promedia, subwoofer, 5.1, hum, ground loop, DIY, 60hz

  • Re: Noise. Static/fuzz noise from all speakers.

    I have had the v.2 400 series speakers for nearly 9 years now. I remember having to get the controller replaced because it was buzzing and the volume adjustment created static (this was around 2002). Since then I have been blasting and blasting and blasting ..... continously since then. Last year both...
    Posted to Computer Speakers (Forum) by risottto on 01-08-2009
    Filed under: broken, Promedia, 5.1, controller, hiss, buzz, hum

  • Hope this forum is still alive, problem with 2.1's...

    God I held Klipsch in such high regard, I still do but this is killing me inside. Anyway, I got the Promedia's worked great for about 2/3 months, and while I was playing my 360 on my TV, using TV speakers, I heard a buzz from my 2.1's and I immediately looked at the Green LED and it flickered...
    Posted to Computer Speakers (Forum) by UnderCover on 12-31-2008
    Filed under: Promedia, subwoofer, sub, 2.1, Problems

  • Promedia 5.1 satellite impedance

    I'm considering reusing my old Promedia 5.1 satellites with an AV receiver but I can't find their impedance listed anywhere. I don't have a receiver picked out yet but the ones I've looked at all require a minimum of 6 to 8 ohms. Anyone know?
    Posted to Computer Speakers (Forum) by nocam on 11-10-2008
    Filed under: Promedia, 5.1, satellite, impedance

  • Promedia 2.1 problem - broken sub or amp? i have no clue

    I thought it was my control that wasnt working. I got another that was working. I replaced the original fuse with one from radioshack. I plugged in the new control pod and connected my ipod, no sound. I look at the fuse. It is pitch black. I try another fuse, It blows too. slow burning and fast acting...
    Posted to Computer Speakers (Forum) by jlab17 on 10-27-2008
    Filed under: Promedia, promedia 2.1

  • Promedia 5.1 busted... pls help.

    All of a sudden they went out with a funny noise. Now I can turn them on and off, the numbers on the volume move but I only get a whistle out of them which doesn't get louder or lower with volume settings... the high pitch whistle also seems to pulsate and if I wait several seconds there is a different...
    Posted to Computer Speakers (Forum) by USlatin on 10-27-2008
    Filed under: broken, dead, Promedia, amp, sub, sound, busted, speaker, pictures, pic, pics, not working, speakers, noise, picture, damaged, amplifier, 5.1

  • Re: promedia ultra 2.0: sometimes no sound

    I had a similar experience with my ProMedia Ultra 2.0 Computer Speakers, which I purchased at an Apple store in May. They were brilliant for about four months of low usage, and I never played them loudly. Then I began experiencing popping, crackling, unsteady volume levels, and alternating speaker failure...
    Posted to Computer Speakers (Forum) by Joe H on 10-20-2008
    Filed under: broken, computers, buzzing, Promedia, subwoofer
Page 1 of 3 (22 items) 1 2 3 Next >
©2009 Klipsch Audio Technologies. All rights reserved.